Osfox955

You’ll need to properly format and add a folder to start using your new drive.

FAT32format GUI, otherwise known as GUIFormat, is the interface version of FAT32format, a tool designed to help you format disks featuring FAT32 file system. The fact that you can perform this. Mac OS X 10.3 Panther (47 screenshots) 2005: Mac OS X 10.4 Tiger; 2006: Mac OS X 10.5 Leopard: 15 articles, starting with: “Apple’s bid to stay in the big time. GUIFormat This software remains the best and easiest method to format SD Card that is larger than 32GB, it works even on a 256GB memory card. This takes just 6 seconds to change the SD card file system, all you need to do is install the software, choose the SD.

Starting with Tesla version 2020.16, you can format and set up the drive from the car. With the drive inserted and no other connections to the 2nd USB port, select Controls > Safety & Security, and then FORMAT USB DEVICE. This will erase the drive contents, formats, and inserts the necessary folder for the dashcam feature.

You can also use a PC or Mac with the following step-by-step process to get the drive properly set up.

Most drives, 32 GB and under, are pre-formatted for FAT32. Larger drives may be FAT32, exFAT or NTFS. Only drives that are formatted for FAT32 or Linux ext4 can be seen by our cars. With Tesla software version 2020.12 or later software, the car can also read exFAT. If it is NTFS or exFAT on older software, you’ll need to reformat it (which erases all the data on the flash drive).

Windows

Formatting with Windows (option 1)

With Windows on drives at or under 32 GB, open Explorer. In the left pane, right-click on the USB drive and select Format. BE ABSOLUTELY SURE you selected the USB flash drive and not another hard disk. Set the File system to FAT32 and click Start.

Formatting with GUIformat (option 2)

For drives larger than 32 GB, to use FAT32 (not exFAT) you’ll need a third-party utility since Windows doesn’t allow formatting FAT32. One free product we like is GUIformat, which is really simple. Click on the image on the web page to download the program. Run guiformat.exe (there is no installation).

Formatting with RMPrep (option 3)

You can also use the free RMPrep program we use to test fake drives to also reformat the drive. Using RMPrep, with the flash drive selected, check the box “Set partition as non-bootable” and in section 4, select FAT32. Then click on the teal button “6 Prepare Drive“.

Create the TeslaCam Folder

After formatting the drive, create a folder with this exact name “TeslaCam”. For example, in Windows, open Explorer on the folder and click on New Folder and set the name.

Macintosh

Formatting on a Mac

Open Finder, search for Disk Utility and select.

On the left pane, select your flash drive. Be absolutely sure you’ve selected your flash drive and not the hard disk! Click the Erase tab to identify the current format. If not “MS-DOS (FAT)”, Select MS-DOS (FAT) as the format. Note that Apple makes it a bit confusing as “MS-DOS (FAT)” is really Windows FAT32.

While not required, you may want to set the volume name. Anything you want is fine. Click on the lower Erase… button and a confirmation dialog appears.

Click the Erase button and the format begins.

Create the TeslaCam Folder

The last step is to create the TeslaCam folder.

Partitioning

While Tesla does not officially support music and recording dashcam video on the same drive, it can be done by creating two partitions on the drive. The process is not simple, and I’m not sure it’s worth the trouble, but if you need to use one USB port for your phone, that only leaves one port for USB music and dashcam video. SomeJoe7777 has made a good partitioning tutorial on TMC.

One downside of this approach is when a drive failure occurs at some point due to dashcam longevity issues. Depending on how the drive fails, it may take your music collection along with it.

(Jun-2020 update)

Nov 23, 2020 • Filed to: Answer Hard Drive Problems • Proven solutions

If you also own a Linux system, which is running on low disk space, then you might be facing a similar situation. Although Linux is one of the most popular open-source operating systems, it can be a bit complicated at times. For instance, there is no direct solution to do a Linux format disk using a dedicated GUI feature. Don't worry – you can still erase disk on Linux with the help of the right commands. Read on and clear your Linux disk space by following this extensive guide.

Part 1: Why We Need to Format and Wipe Linux Disk?

Before we get to know different ways to format a disk on Linux, it is vital to understand the reasons behind it. Ideally, there could be the following major reasons for wiping or formatting a disk on a Linux system:

• If your system is running low on free space, then you can choose to wipe the data of a partition or a disk.
• Sometimes, a system can become slow by having limited free space. By formatting its Linux drive, you can improve its performance as well.
• If your system has been corrupted by malware, then you can wipe the hard disk of your Linux to resolve this.
• Mostly, users prefer to do a Linux format disk before reselling their systems. This helps them protect their data.
• There could be an issue with the firmware or the system storage, which can be fixed after wiping a Linux disk.

Part 2: How to Format a Linux Hard Drive?

Unlike Windows or macOS, there is not a dedicated disk management tool that can help us partition or format the disk. Therefore, we need to take the assistance of certain commands to format a Linux disk. If you are connecting your drive for the first time to your Linux system, then you need to create a partition beforehand. To implement this, you can enter the fdisk command. Once a partition is created, you can use the 'mkfs.ext4' command to format the disk. Here's a simple solution to format a disk on a Linux system.

Step 1: Create a partition of the disk

Firstly, connect the disk to your Linux system if you haven't already and launch the Terminal window on it. You can enter the following command to check it:

sudo fdisk –l.

Now, to create a partition, enter the command 'fdsk' in the following format:

sudo fdisk /dev/sdb.

This will launch the results of the fdisk command. If you want, you can type 'm' to get help. It will display a list of the supported parameters. You can type 'n' to create a new partition, 'd' to delete the partition, 'p' to check the partition table, and so on.

Firstly, press 'p' and enter to view the partition table. This will let you know about the disk identifier and the sector space. Subsequently, enter the 'n' command to create a new partition. You will be given an option to create a primary or an extended partition. Press 'p' to create a new primary partition and give it a number from 1 to 4. If you want to create a single partition, then enter '1'.

Step 2: Format the disk

Great! Once you have created the relevant partition on your Linux system, you can format it by entering the command –

sudo mkfs.ext4 /dev/sdb.

This will make the system look for the available partitions on the drive. When you are asked to confirm your choice, just press 'y'. Afterward, wait for a while as the selected partitions would be formatted on the Linux system.

Step 3: Mount the file system (optional)

If you want, you can mount the file system as well. To do this, you can use the 'mkdir /data' command to make a directory. After that, end the following command to mount it:

mount /dev/sdb1 /data.

Part 3: How to Wipe a Hard Drive on Linux?

If you are planning to resell your system or are concerned about your privacy, then you should consider wiping the drive instead. Unlike formatting a disk, wiping it will erase the data and make the recovery process harder than before. Thankfully, there are multiple commands to do Linux wipe the disk. Here are some simple solutions to wipe a hard drive on Linux.

1. wipe

As the name suggests, the command is used to wipe data from a magnetic disk. Though, a lot of Linux systems do not have the command readily installed. In this case, you can use the apt install command first.

# apt install wipe.

Once it is done, just use the 'wipe' command in the format - wipe [options] target. For instance, to wipe a partition, simply enter the command:

# wipe /dev/sda2

Confirm your choice, by entering 'yes' and wait as the selected partition would be wiped.

2. shred

This is one of the best ways to protect your private data on a Linux system. Ideally, this works as a dedicated shredder – that would overwrite your data with something else, making the recovery process harder. This Linux based command has the following syntax:

shred [option] target

As you know, 'target' would specify the location you wish to shred. It can be a partition, folder, or file name. Subsequently, it can have the following options.

• -n: To overwrite data 'n' times
• -f: To change permission and allow the writing operation
• -u: Truncates the files after shredding them
• -s: To provide the size to shred
• -u: To remove the file after shredding
• -v: To enable the verbose mode
• -z: To add zeros to the final overwriting process

Therefore, you can wipe the Linux disk, by entering a command like this:

# shred -vfz -n 10 /dev/sda2.

This will follow ten passes of overwriting on the provided location, making it impossible for a recovery tool to retrieve data from it.

3. dd

If you are running short on time, then consider using the 'dd' command to erase disk on a Linux system. Instead of generating random data, it will overwrite the entire disk with strings of zeros. Therefore, it will take less time to wipe the disk and protecting your information. Although, it provides certain options that you can use to customize the process.

dd if=source of=target [Options]. Tomb raider 2018 dual audio 720p.

Make sure that you run the command prompt and as a super-user. Here's a simple demonstration of the same.

# dd if=/dev/zero of=/dev/sda2 bs=512 count=1.

The command will overwrite the target location with a string of zeros, as specified in the source. Also, this will copy 512 bytes in a single count. One of the major advantages of this is the time taken by the dd command is lesser than shred.

4. scrub

Lastly, you can also take the assistance of the 'scrub' command to overwrite your disk with specific patterns. Sometimes, the patterns can be randomly generated by the system too. Since the command is not present in every Linux system by default, you might need to install it first. To do this, you can use the apt install command.

Once it is done, just enter the command in the following syntax:

scrub [option] target.

Even if you don't provide an option and just specifies the target location to wipe, the command will work. Though, you would be asked to verify your choice to erase disk on Linux entirely. Here's a quick example of the same:

Gui Format Mac Os 10.13

# scrub /dev/sda5.

Part 4: Tips for Formatting and Wiping Linux Disk

After getting to know about these popular commands to create new disk space on Linux, you would certainly be able to format or wipe it. Besides that, you can consider following these tips to format or wipe the Linux disk successfully.

• Make sure that you have logged-in as a super-user (administrator) while wiping a disk. This will make the entire process a whole lot easier.
• Not every command might be installed on your system. Therefore, you can consider checking its status or installing it beforehand.
• Although there are third-party applications available to shred and wipe a disk, it is recommended to use reliable commands. If you use a readily available tool, then make sure it is from a trusted source with a positive reputation in the industry.
• Always double-check the command before entering it (particularly the syntax and the location). One small error and you might end up causing irrevocable damage to your system.
• Most importantly, take a backup of your important files before wiping the Linux disk. This will make sure that you have a second copy of your vital data in advance.

Gui Format Mac Os High Sierra

That's a wrap, folks! Now when you know how to format or wipe disk on Linux, you can easily meet your requirements. In case if you have accidentally deleted your data or have formatted a drive, then use a reliable data recovery solution like Recoverit Data Recovery. Using it, you can just attach your Linux device to a PC and later extract the lost or inaccessible content from it. Go ahead and try some of these methods and feel free to share your shortcuts or tips in the comments below.

Video Tutorial on How to Recover Data from Hard Disk After Disk Wipe

Gui Format Mac Os 10.10

What's Wrong with Drive

Gui Format Mac Os Recovery Tool

Recover Your Drive

Fix Your Drive

Format/Wipe Drive

Know Your Drive